Saw benches for sawing firewood

SAW BENCHES

SWINGING TABLE

Singing table saw benches: the best friends of the woodcutters

The trestle saw benches with swinging table have a particular compartment where to insert the trunks which will be subsequently cut by a blade which is activated by the oscillating system.

The Rosselli team has studied the operation down to the smallest detail in order to then be able to build efficient tilting circular saws.

Let’s see the main features that make saw benches the best friends of woodcutters.

The cradle, where all the processing takes place, has several grooves that in addition to blocking the trunk prevent it from rolling.

In addition, a protection grid has been applied which must necessarily be lowered over the work area to allow the machine to be operated.

Still on the subject of safety, another peculiarity of these saws is the emergency brake which locks the blade in less than ten seconds.

Kreissäge mit Wippkreissägen
Tilting saw bench with wood guard

Swinging saw bench for everyone

All models are swinging circular saws equipped with wheels, transport lever and wheel locking when stationing, so that you can move the circular saw wherever you want and have it stable on any terrain. Rosselli customers have always and fortunately been very demanding, this it is a source of great stimulus for us.

For this we offer three models of swinging bench saws with different characteristics to choose from.

First of all, you can opt for the electric motor or the cardan shaft PTO. You can choose between normal blade or widia blade, between different cutting depths and the width of the cradle that is more functional for you.

Join the company and choose YOUR Rosselli saw bench.

THE PHASES OF USE

1 Place the wood on the circular saw

Place the wooden log in the basket

2 Lower the safety guard of the circular saw

Lower the protective grille with the locking handles

3 Push the wood against the saw blade

Push the tilt table forward towards the blade

4 The saw cut the wood with the blade

The wood or branches are cut

IN THE VERSION FOR...

Cardan shaft for circular saw

For tractor - PTO shaft

PTO-driven circular saw for tractors, available in versions with a 600 mm or 700 mm circular blade

Grizzly 600 R
Ø 600
Grizzly 700 R
Ø 700
Electric motor for circular saw and saw bench

Electric motor - Single-phase and Three-phase

Circular saw with a 220V single-phase or 380V three-phase electric motor, available with 600 mm or 700 mm diameter blades.

Yoghi 600 M-T
Ø 600
Grizzly 700 M-T
Ø 700
Grizzly 600 M-T
Ø 600

1..2..3.. AND THE CUT IS MADE

THE PHASES OF THE CUT WORK

  1. The wood is placed in the tilting cradle/table, which is inclined toward the blade so that the log naturally slides into position without requiring excessive effort from the operator.
  2. The cradle’s gripping teeth prevent the log from rotating, keeping it stable in the compartment even with multiple pieces within the capacity limits, while the operator closes the mesh guard that separates their hands from the cutting zone.
  3. Keeping their hands on the handle equipped with a protected control device, the operator pushes the tilting table forward, bringing the wood against the blade and achieving a fast, controlled cut.
  4. At the end of the stroke, the tilting table is returned to its starting position, and the cut wood is discharged.

OUR TILTING-SAW MODELS

Grizzly 600 R

Grizzly 600 R

Grizzly 700 R

Grizzly 700 R

Yoghi 600 M-T

Yoghi 600 M-T

Grizzly 600 M-T

Grizzly 600 M-T

Grizzly 700 M-T

Grizzly 700 M-T